Evidence for a shock-metamorphic breccia within a buried impact crater,Lake Raeside,Yilgarn Craton,Western Australia     

A. Glikson  A. Hickman  R. Crossley 《Australian Journal of Earth Sciences》2016,63(1):99-109

Mineral exploration drilling 60 km west of Leonora in 2008 intersected >95 m of poorly consolidated granitoid-dominated breccia at the base of a Cenozoic paleochannel beneath Lake Raeside. The breccia, initially interpreted as a kimberlite, is composed of poorly consolidated fragments of granitic gneiss, felsite and metamorphosed mafic rock within a matrix of fine to medium-grained breccia. Microscopic examination revealed quartz grains displaying well-developed planar deformation features (PDFs) dominated by the ω? {1013} planar set, diaplectic silica glass and diaplectic plagioclase glass. These features constitute the diagnostic hallmarks of shock metamorphism owing to high-velocity impact of a large meteorite or asteroid. The PDFs in quartz grains of the breccia are distinctly different from metamorphic deformation lamellae produced tectonically or in diatremes. Airborne total magnetic intensity data suggest an outline of an 11 km-diameter crater, consistent with the significant thickness of the shock-metamorphosed breccia at >95 m, suggestive of the existence of a large impact structure.  相似文献   

新疆三塘湖盆地马朗凹陷中二叠统芦草沟组泥页岩层系SiO2赋存状态与成因     

刘国恒  黄志龙  郭小波  刘再振  高潇玉  陈常超  张成林  王昕 《地质学报》2016,90(6):1220-1235

为了弄清新疆三塘湖盆地马朗凹陷芦草沟组泥页岩层系中SiO_2对储集层物性、脆性等特性的影响,通过全岩和黏土矿物X衍射、岩石力学性质、阴极发光、扫描电镜及电子能谱等实验手段对其中SiO_2的赋存状态进行了研究,初步探讨了SiO_2不同形态赋存的机理,并在此基础上探究了石英含量对储层的影响。研究表明:凝灰岩、泥页岩和粉砂质泥岩中二氧化硅多以非晶态形式存在。二氧化硅在凝灰岩中多呈不规则球粒状,而在泥页岩和粉砂质页岩中无固定形态。凝灰质泥岩、凝灰质白云岩和白云岩中二氧化硅呈现一定的晶体形态。在凝灰质泥岩中,二氧化硅以自生石英形态聚集呈条带状,在凝灰质白云岩中则以自生石英形态发育于孤立的孔、洞之中,而白云岩中二氧化硅只能生长成Opal-A/Opal-CT阶段。凝灰质成分及其脱玻化作用为自生石英的生长提供了二氧化硅和生长空间,是控制SiO_2赋存状态的根本因素。此外,储集层孔隙度、渗透率和抗压强度都与石英含量呈一定正相关性,泊松比则与其呈负相关性。  相似文献   

西藏班戈错水菱镁矿藻类成矿实验及其成因分析     

蒋天明  姬连敏  程怀德  李斌凯  李刚  马海州  张西营  李长忠  马学海  张鹏程 《地质论评》2021,67(5):67060004-67060004

目前关于天然水菱镁矿的形成认识主要有蒸发沉积成因和生物成因两类。前人在室内成功制备出水菱镁矿矿物,证实了该矿物的无机成因理论,但是实验结晶条件明显高于西藏班戈错的寒冷气候条件和水化学条件,并且班戈错湖水通过自然蒸发结晶也难以形成水菱镁矿矿物,而这一认识与周边阶地上正在形成水菱镁矿的现象相矛盾。因此,自然蒸发沉积可能不是现阶段班戈错水菱镁矿的主要形成过程,而已有研究表明,藻类具备诱导形成碳酸盐矿物的能力,本文利用西藏班戈错Ⅲ湖湖水及其藻类开展室内模拟实验,并与无藻类的湖水自然结晶结果相对照,探讨藻类生命活动与班戈错水菱镁矿的成因联系。研究发现,藻类不仅能够适应高盐度盐水环境（矿化度117.3 g/L）,并且在其光合作用过程中还能显著提高周围水体pH值（最高可达10.564）,诱导并促进球碳镁石在藻类网状节点处结晶沉淀,该矿物进一步脱水即能够形成水菱镁矿矿物;而人为提高班戈错Ⅲ湖湖水Mg2+浓度也仅能结晶形成三水菱镁矿矿物,无球碳镁石或水菱镁矿结晶析出。因此,西藏班戈错水菱镁矿的形成过程与藻类生物成矿作用密切相关,但是有关球碳镁石向水菱镁矿转变的具体条件以及藻类成矿作用的具体分子机制仍不清楚,有待于进一步研究。  相似文献   

Reply to Sandgren and Smol: further discussion on chrysophyte cyst taxonomy     

Heikki Simola 《Journal of Paleolimnology》1993,9(1):63-68

  相似文献   

钻井液用GX－1硅稀释剂的作用机理及应用          下载免费PDF全文

郝庆喜 《探矿工程》1994,(6):34-35,38

本文阐述了大客车的噪声识别和分析，在大型客车噪声控制中，用声强法声场分析和噪声谱分析法识别主要噪声源。  相似文献   

Automated in-situ monitoring of atmospheric non-methane hydrocarbon concentrations and gradients     

A. H. Goldstein  B. C. Daube  J. W. Munger  S. C. Wofsy 《Journal of Atmospheric Chemistry》1995,21(1):43-59

A fully automated system measuring C2–C6 hydrocarbon concentrations and vertical gradients was installed at Harvard Forest in Petersham, Massachusetts, using a gas chromatograph with dual flame ionization detectors and cryogenic sample preconcentration. Measurements were made simultaneously at two heights above the forest canopy at forty five minute intervals, continuously from July 1992 to the present. Data for concentration gradients were combined with CO₂ flux measured by eddy correlation to determine the rates of production of biogenic hydrocarbons by the forest.  相似文献   

Hydrocarbons in surface sediments from the Changjiang (Yangtze River) Estuary, East China Sea   总被引：9，自引：0，他引：9  

Bouloubassi I  Fillaux J  Saliot A 《Marine pollution bulletin》2001,42(12):1335-1346

Sedimentary aliphatic (AH) and polycyclic aromatic hydrocarbons (PAHs) were studied in the Changjiang Estuary and the adjacent East China Sea. Total AH ranged from 2.20 to 11.82 μg g⁻¹ and consisted of n-alkanes and a dominant petroleum-related unresolved complex mixture (UCM). Within the n-alkanes, terrestrial plant wax compounds prevailed at nearly all stations. Of the PAHs, biogenic perylene dominated at stations receiving riverine inputs. Anthropogenic PAHs originating from combustion/pyrolysis processes varied from 17 to 157 ng g⁻¹, while fossil PAH concentrations ranged from 42 to 187 ng g⁻¹. Both biogenic and anthropogenic hydrocarbons are primarily derived from riverine discharges and accumulate at shallow-water stations. Distinct phase associations lead, nevertheless, to different sedimentation patterns. Fossil PAHs are enhanced at offshore stations where they are introduced directly by shipping activities. Biomarker fingerprints ascribe their source to Chinese crude oils. The overall levels of anthropogenic hydrocarbons are low compared to relevant areas worldwide and reveal a low/moderate level of hydrocarbon pollution.  相似文献   

The effects of organic removal treatment on the integrity of δ<Superscript>18</Superscript>O measurements from biogenic silica     

Jonathan J. Tyler  Melanie J. Leng  Hilary J. Sloane 《Journal of Paleolimnology》2007,37(4):491-497

Prior to oxygen isotope analysis of biogenic silica by fluorination techniques, sediments must be cleaned of all organic compounds. Despite the expanding volume of research utilising oxygen isotope ratios in biogenic silica in palaeoclimatology, very little is known about the effects of different standard preparation methods for the removal of organic matter on the isotope values. Here we compare a number of methods for the removal of organic matter in order to assess their effectiveness and influence on subsequent isotope measurements. Not all the methods described here effectively removed organic matter, the best treatments were H₂O₂ and ignition in air at 550°C. Ignition in air at 950°C, and heating in vacuum at 250 and 450°C results in marked alteration of isotope values, whereas use of hydrogen peroxide (H₂O₂), nitric acid (HNO₃) and plasma ashing have little or no effect, within the bounds of analytical error. Ignition in air at 550°C was the most effective technique, and induced no alteration of δ¹⁸O_silica, but practical constraints may limit the application of this method routinely. Our findings indicate that considerable caution is required when preparing sediment for isotope analysis of biogenic silica.  相似文献   

Microbial–silica interactions in Icelandic hot spring sinter: possible analogues for some Precambrian siliceous stromatolites     

Kurt O. Konhauser  Vernon R. Phoenix  Simon H. Bottrell  David G. Adams  & Ian M. Head 《Sedimentology》2001,48(2):415-433

Silicified deposits, such as sinters, occur in several modern geothermal environments, but the mechanisms of silicification (and crucially the role of microorganisms in their construction) are still largely unresolved. Detailed examination of siliceous sinter, in particular sections of microstromatolites growing at the Krisuvik hot spring, Iceland, reveals that biomineralization contributes a major component to the overall structure, with approximately half the sinter thickness attributed to silicified microorganisms. Almost all microorganisms observed under the scanning electron microscope (SEM) are mineralized, with epicellular silica ranging in thickness from < 5 μm coatings on individual cells, to regions where entire colonies are cemented together in an amorphous silica matrix tens of micrometres thick. Within the overall profile, there appears to be two very distinct types of laminae that alternate repeatedly throughout the microstromatolite: ‘microbial’ layers are predominantly consisting of filamentous, intact, vertically aligned, biomineralized cyanobacteria, identified as Calothrix and Fischerella sp.; and weakly laminated silica layers which appear to be devoid of any microbial component. The microbial layers commonly have a sharply defined base, overlying the weakly laminated silica, and a gradational upper surface merging into the weakly laminated silica. These cyclic laminations are probably explained by variations in microbial activity. Active growth during spring/summer allows the microorganisms to keep pace with silicification, with the cell surfaces facilitating silicification, while during their natural slow growth phase in the dark autumn/winter months silicification exceeds the bacteria’s ability to compensate (i.e. grow upwards). At this stage, the microbial colony is probably not essential to microstromatolite formation, with silicification presumably occurring abiogenically. When conditions once again become favourable for growth, recolonization of the solid silica surface by free‐living bacteria occurs: cell motility is not responsible for the laminations. We have also observed that microbial populations within the microstromatolite, some several mm in depth, appear viable, i.e. they still have their pigmentation, the trichomes are not collapsed, cell walls are unbroken, cytoplasm is still present and they proved culturable. This suggests that the bulk of silicification occurred rapidly, probably while the cells were still alive. Surprisingly, however, measurements of light transmittance through sections of the microstromatolite revealed that photosynthetically active light (PAL) only transmitted through the uppermost 2 mm. Therefore the ‘deeper’ microbial populations must have either: (i) altered their metabolic pathways; (ii) become metabolically inactive; or (iii) the deeper populations may be dominated by different microbial assemblages from that of the surface. From these collective observations, it now seems unequivocal that microstromatolite formation is intimately linked to microbial activity and that the sinter fabric results from a combination of biomineralization, cell growth and recolonization. Furthermore, the similarities in morphology and microbial component to some Precambrian stromatolites, preserved in primary chert, suggests that we may be witnessing contemporaneous biomineralization processes and growth patterns analogous to those of the early Earth.  相似文献   

Silica mobility and fluid movement during metamorphism of the Connemara schists, Ireland   总被引：5，自引：1，他引：5  

B. W. D. YARDLEY  S. H. BOTTRELL 《Journal of Metamorphic Geology》1992,10(3):453-464

Quartz veins are developed in a wide range of metasediment types in the upper amphibolite facies rocks of Connemara, and attest to considerable migration of silica. Contrary to common assumptions, there is clear evidence that these veins do not primarily result from movement of fluid to regions of lower P–T down the regional geothermal gradient. Under amphibolite facies conditions, a dilute chloride fluid moving down temperature has the potential to alter 60g of plagioclase to muscovite for each gram of vein quartz precipitated, while cooling over the temperature interval from 650 to 500° C. The absence of significant metasomatic effects in the vein walls effectively precludes a simple origin from such through-flowing, externally derived fluids. The oxygen isotopic composition of matrix quartz shows considerable differences between different rock types (quartzite, pelite and marble), with a range of δ¹⁸O_SMOW from c.+ 11.5% (quartzite) to + 18.5% (marble). In each rock type, vein quartz compositions closely match those of the matrix quartz. These results demonstrate the importance of local segregation processes in the formation of veins, and suggest that fluid convection cells were not developed during metamorphism on a scale larger than the individual sedimentary formations, if at all. Both oxygen isotope data and the absence of metasomatism indicate that veins form primarily by segregation of quartz from the host lithologies, with only a relatively minor component of through flow of externally derived fluid. Veins are clearly not the major pathways of metamorphic dewatering. It is proposed that abundant veins in the predominantly pelitic Ballynakill Formation formed during peak metamorphic D3 folding because the formation was embrittled by high fluid pressures but was capped by impermeable marble. Hence the pelitic formation fractured repeatedly and the pore fluid drained through the fractures to form veins, while irreversible loss through the rest of the succession was a much less important process. In the central mountains of Connemara, rather pure, unreactive quartzites are cut by widely spaced, laterally extensive quartz veins that are axial planar to D3 folds. These veins may mark pathways whereby metamorphic fluid made its way through the massive impermeable quartzite from lower parts of the nappe pile, but here too, oxygen isotope data indicate considerable segregation of locally derived quartz, reflecting the importance of pumping of fluid between wail rocks and fractures relative to the component of through flow.  相似文献